Sharpshooter for PC/Network Use - Barcode Identification Toolset
| |
• Detect and identify barcodes and Data Matrix codes
• 1D codes: detect or read common barcodes
• 2D codes: verify or read ECC 200 Data Matrix codes
to a minimum of 0.10 mm code module size
• Verify characters
• Output codes via serial interface RS232 |
|
|
BVS-E Standard 
BVS-E Advanced
BVS-C Standalone
Sharpshooter Toolset Comparison
|
Available Tools |
Applications |
BVS-E
Stand.
More |
BVS-E
Adv.
More |
BVS-C
More |
BVS-ID |
|
Brightness |
|
• Verify part presence
• Check part illumination
• Determine part completeness |
■ |
■ |
■ |
|
|
Contrast |
|
• Verify part presence
• Verify part assembly
• Check for part damage |
■ |
■ |
■ |
|
|
Contour |
|
• Differential parts shapes
• Check part features
• Check for burrs or flashing |
■ |
■ |
■ |
|
|
Edge Position |
|
• Verify part position
• Check for fill level
• Verify label or cap position |
■ |
■ |
■ |
|
|
Edge Count |
|
• Verify pins on a IC
• Check for threads
• Count contents in a package |
■ |
■ |
■ |
|
|
Edge Width |
|
• Verify hole width
• Check for part tolerance
• Differentiate package size |
■ |
■ |
■ |
|
|
Pattern Match |
|
• Verify part presence
• Locate parts
• Check for quantity of parts |
■ |
|
■ |
|
|
Geometric
Pattern
Match |
|
• Locate rotated parts
• Verify part rotational angle
• Locate complex part shapes |
|
■ |
|
|
|
OCV |
|
• Check for correct lot/date print
• Check for logos
• Check for special characters |
|
|
■ |
■ |
Barcode/ Data Matrix
Code |
 |
• Code verification
• Documentation of parts used
• Monitor print quality |
|
|
|
■ |
| |
| Order Code |
Part Number |
Version |
| BVS0001 |
BVS ID-3-001-E |
PNP, 8 mm standard lens, 50-1000 mm assured range |
| BVS000T |
BVS ID-3-003-E |
PNP, 12 mm telephoto lens, 50-1000 mm assured range |
| BVS000Y |
BVS ID-3-007-E |
PNP, 16 mm telephoto lens, 150-1000 mm assured range |
| BVS00EH |
BAE PD-VS-002-E |
*BVS-M Monitor | *The BVS Monitor requires BVS firmware version ST2.3.0.20.sfw2 or higher.
|
|
|